Mô tả sản phẩm
| Product image | Type | Description |
|---|---|---|
 |
DPM-900 Series Strain Amplifier |
· Built-in HPF cancels the effect of temperature drift · Digital switch makes it easily to confirm the setting values even power off. · High voltage output of ±10 V and high SN ratio · Broad frequency response DC to 10 k Hz （913B） |
 |
DPM-950 Series Strain Amplifier |
· Built-in HPF cancels the effect of temperature drift · Digital switch makes it easily to confirm the setting values even power off. · High voltage output of ±10 V and high SN ratio |
 |
CDA/CDV-900A Signal Conditioner |
· High sensitivity (Up to 10 k times) · Fast response (Up to 500 kHz) · Long-distance testing (CDA-900A can measure up to 2 km) · Excellent nonlinearity (Within ±0.01%FS) · Universal power supply (100 to 240 VAC or 10.5 to 15 VDC) |
 |
DA-710A DC Amplifier |
· 2 channels per unit · Built-in LPF · Allowable common mode input 300 V and max measuring input ±110 V · With voltage calibration function |
 |
ERK-100 Series Telemetry Transmitter/Receiver for Strain-gage Transducers |
· Easy setting and execution. No PC required. · With functions of monitoring the status about receiving signal strength, battery remaining and communication errors · 2 antennas enables to improve the reliability of signal transmission · With analog voltage output · Battery on the transmitter can operate for up to 12 hours. |
 |
MRT-400 Series Compact Digital Telemetry System |
· No need for radio frequency adjustment · Easy operation. Buttons on the receiver enable users to perform zero adjustment and start measurement. · Transmitter is compact, lightweight and low power consumption. · Emitting radio waves are extremely faint, and thus no special qualification is required for operation. (For Japanese domestic market) |
 |
MCE-24A Series Online Conditioner System |
· 24 channels per unit · All conditioner cards are I/O isolated and easy to replace. · Interface RS-232C, USB or, if desired, LAN · Up to 20 units can be synchronized for measurement in up to 480 channels. |
 |
MCD-A Series Multi Conditioner System |
· 8-channel or 16-channels Unit Base is available. · 6 different types of conditioner cards are available. · Each conditioner card features I/O isolation. · With a digital calibrator generates strain at 10 micro strain step. |
 |
CDV-400B Series Small-Sized Signal Conditioner System |
· 5 different kinds of conditioner units are available for the user’s measurement purpose. · Signals of multiple units can be output from a concentrated connector. · Simultaneous calibration of all channels is possible |
 |
SGI-100A Strain Gage Amplifier for Lecture |
· Strain Gage Amplifier for lectures · With a digital display and voltage output · Limited distribution on e-shop Kyowa |
Tags: Strain Amplifiers, DC Amplifiers, Kyowa
