kyowa-strain-amplifiersdc-amplifiers

Strain Amplifiers/DC Amplifiers

Order
Model: Strain Amplifiers/DC Amplifiers Maker: Tag:

Product Description

Product image Type Description
DPM-900 Series
Strain Amplifier
· Built-in HPF cancels the effect of temperature drift
· Digital switch makes it easily to confirm the setting values even power off.
· High voltage output of ±10 V and high SN ratio
· Broad frequency response DC to 10 k Hz (913B)
DPM-950 Series
Strain Amplifier
· Built-in HPF cancels the effect of temperature drift
· Digital switch makes it easily to confirm the setting values even power off.
· High voltage output of ±10 V and high SN ratio
CDA-900A/CDV-900A
CDA/CDV-900A
Signal Conditioner
· High sensitivity (Up to 10 k times)
· Fast response (Up to 500 kHz)
· Long-distance testing (CDA-900A can measure up to 2 km)
· Excellent nonlinearity (Within ±0.01%FS)
· Universal power supply (100 to 240 VAC or 10.5 to 15 VDC)
DA-710A
DC Amplifier
· 2 channels per unit
· Built-in LPF
· Allowable common mode input 300 V and max measuring input ±110 V
· With voltage calibration function
ERK-100 Series
Telemetry Transmitter/Receiver for Strain-gage Transducers
· Easy setting and execution. No PC required.
· With functions of monitoring the status about receiving signal strength, battery remaining and communication errors
· 2 antennas enables to improve the reliability of signal transmission
· With analog voltage output
· Battery on the transmitter can operate for up to 12 hours.
MRT-400 Series
Compact Digital Telemetry System
· No need for radio frequency adjustment
· Easy operation. Buttons on the receiver enable users to perform zero adjustment and start measurement.
· Transmitter is compact, lightweight and low power consumption.
· Emitting radio waves are extremely faint, and thus no special qualification is required for operation. (For Japanese domestic market)
MCE-24A Series
Online Conditioner System
· 24 channels per unit
· All conditioner cards are I/O isolated and easy to replace.
· Interface RS-232C, USB or, if desired, LAN
· Up to 20 units can be synchronized for measurement in up to 480 channels.
MCD-A Series
Multi Conditioner System
· 8-channel or 16-channels Unit Base is available.
· 6 different types of conditioner cards are available.
· Each conditioner card features I/O isolation.
· With a digital calibrator generates strain at 10 micro strain step.
CDV-400B Series
Small-Sized Signal Conditioner System
· 5 different kinds of conditioner units are available for the user’s measurement purpose.
· Signals of multiple units can be output from a concentrated connector.
· Simultaneous calibration of all channels is possible
SGI-100A
Strain Gage Amplifier for Lecture
· Strain Gage Amplifier for lectures
· With a digital display and voltage output
· Limited distribution on e-shop Kyowa