kyowa-instrumentation-amplifier

Instrumentation Amplifiers

Order
Model: Instrumentation Amplifiers Maker: Tag:

Product Description

Product image Type Description
WGA-900A
Instrumentation Amplifier
· Functions explanation by touch keys
· Data can be saved in SD cards
· TEDS compatible
· Result of comparison will be showed in different colors
WGA-680A
WGA-680A
Instrumentation Amplifier
· CC-Link optional available
· High-performance processing (Sampling speed: 4000 times/s, 24-bit A/D converter)
· Substantial comparison functions (Extra high, high, OK, low, and extra low)
· Built-in D/A converter (Sampling speed: 4000 times/s)
· Display: -99999 to 99999
WGA-650B
Instrumentation Amplifier
· Wide no-load zero adjustment range ±2 mV/V
· High/low limit comparators
· Indicated value can be output in a voltage range of 0 to 10 V or in a current range of 4 to 20 mA.
· Up to 4 transducers with 350Ω bridge resistance can be connected in parallel.
WGA-710C
WGA-710C
Instrumentation Amplifier
· Key lock to prevent wrong operation
· Suitable excitation voltage for transducer can be selected
· Built-in remote sensing circuit enables high accurate measurement
WGI-400A
WGI-400A
Instrumentation Amplifier
· 3 sensitivity registration modes (Actual load calibration, sensitivity-registered calibration, numerical value-registered calibration)
· Selectable 4 high/low limit patterns in memory
· Level test with desired set-value
WGI-470AS1
WGI-470AS1
High-speed, Compact Indicator
· High-speed sampling: 2 kHz
· Simultaneously output voltage and current
· 5 modes of peak hold
· 3 sensitivity registration modes (Actual load calibration, sensitivity-registered calibration, numerical value-registered calibration)
442B-K01
Instrumentation Printer
· Prints an index number and a channel number in 4 digits each.
· Enables selection of Lister print or Texter print.
· Provides approx. 250 kinds of units by input of 8-bit codes.
· Power supply: 90 to 250 VAC or 24 VDC. (Select one)
· Provides calendar clock.
WGA-200A
WGA-200A Series
Instrumentation Amplifier
· Voltage output, current output, and remote sensing are standard equipped.
· Compact and firm
· Dustproof and drip proof
WGA-120A
WGA-120A
Carrier Type Instrumentation Amplifier
· Strong against inverter noise.
· Output of voltage or current is switchable
WGA-100B
Instrumentation Amplifier
· Bridge excitation, sensitivity, calibration values and frequency response are switchable.
· Available in 2 types: Manual balance and auto balance
WGA-101A
Instrumentation Amplifier
· Bridge excitation, sensitivity, calibration values and frequency response are switchable.
· Available in 2 types: Manual balance and auto balance
WGC-140A
4-channel Signal Conditioner
· Up to 4 units of transducers can be connected independently to the respective amplifier circuits.
· Switchable indicated values of channel to channel or the total
· Analog voltage output of each channel and the total
· High/low limit comparators for the total values
· High-speed output suitable for control, I/O delay approx. 10 ms
· Sensor check and self-test functions
· Display -19999 to 19999 with decimal point anywhere
F08-9026_S2
F08-9026-S2
Measuring Equipment Controller
· Unilateral operation function, and stands switchover function
· Comparison function, and peak hold function
WDC-810C1
Measuring Instrument Controller
· Setting though keyboard simplifies operation commands and operation
· Thin design enables easily mount within the area
· For wide range of applications
WDS-180A
Compact Digital Indicator
· Operates on 2 pieces of AA size dry cells
· TEDS compliant
· Measurement of strain gages or strain-gage transducers
WDS-500B
WDS-500B
Sensor Checker
· Strain, I/O resistance or insulation resistance can be measured individually by pressing relative one key
· Enables to output strain values
· TEDS compliant
· Operates on 2 pieces of AA size dry cells
SDB-410CS
Handy Digital Indicator
· Applicable quarter, half, and full bridge systems
· Enables to check insulated resistance
· Wide measuring range from 0 to ±19999 μm/m
HSC-BS
Small-sized Hybrid Signal Conditioner
· As preamplifiers of control signals for production equipment possible.
· Directly be mounted to circuit boards possible
· External resistors enable adjustment of bridge excitation voltage, zero balance and gain.
CAB-E
Strain Generator
· Generated strain level is determined by setting of 2 dials.
· Remote sensing possible
· No power supply is required
WDS-10
Strain Generator
· Continuously generates equivalent strain with positive or negative polarity
· Digital dial adopted
· No power supply is required
SJB-C
SJB-C
Junction Box
· General Junction Box
· For connecting extension cable of a load cell or junction of multi load cells
· Applicable cable:φ10 to φ11 (15C)
SJB-D
Junction Box
· General Junction Box
· For connecting extension cable of a load cell or junction of multi load cells
· Applicable cable: φ7 to φ8 (10B)
JBS-C
Junction Box
· Pressure-resistant and explosion proof Junction Box, ignition degree d2G4
· For connecting extension cable of a load cell or junction of multi load cells
· Applicable cable: φ10 to φ11, please specify the cable diameter.
BMD-200B
Indicator for Pipe Strain Transducer
· Digital liquid-crystal display eliminates reading errors and facilitates observation outdoors.
· One-touch polarity switchover
· Rechargeable battery operated (A dedicated battery charger is provided.)